Toro 570Z Spray Head 4"

ToroSKU: 570Z-4P

Price:
Sale price $3.45
Stock:
Sold out

Description

Toro 570Z Spray Head 4”

  • No Nozzle (Flush Plug Only)
  • Pop-Up Height: 4 inches
  • Connection Inlet: 1/2 inch

Toro 570Z Spray Head

Features & Benefits

Toro® 570Z Series spray heads provide everything needed for residential and commercial contractors to satisfy all installation and retrofit requirements. In combination with Toro spray and rotating nozzles, 570Z Series spray heads can be configured in hundreds of combinations and present an unparalleled range of flexibility. Available in 2”, 3”, 4”, 6” and 12” models with both bottom and side inlet thread options, Toro 570Z Series spray heads are further available with patented in-stem X-Flow® Technology and Pressure Regulating water-saving features. Trusted for over 25 years, Toro's 570Z Series spray heads are the ideal choice.

  • Can be configured in hundreds of combinations and present an unparalleled range of flexibility
  • Pressure Regulating water-saving features
  • Trusted for over 25 years, Toro's 570Z Series spray heads are the ideal choice.

Zero Flush Wiper Seal

The elimination of flushing on pop-up allows for more sprinklers to be installed per zone.

Patented X-Flow® Technology

The X-Flow in-stem flow shut-off device is built into the riser and restricts water loss by 99% should the nozzle be removed or damaged. The exclusive X-Flow device greatly reduces water waste, landscape erosion, and wet hardscape safety concerns. Furthermore, X-Flow allows for ’dry’ nozzle and filter replacement or system maintenance while the system is running.

One-Piece Check Valve

Pre-installed from the factory or easily installed in the field, Toro's one-piece check valve prevents low-head drainage on elevation changes of up to 10 feet.

Ratcheting Riser

Quick and precise arc adjustment on all pop-up models.


Product Details

Operational

  • Radius: 2 feet to 26 feet
  • Operating pressure range: 20 - 75 psi (15-75 psi for Low Pressure models)
  • Recommended operating pressure for spray nozzles: 30 psi
  • Recommended operating pressure for rotating nozzles: 40-50 psi
  • Flow rate: 0.5 – 4.5 gpm

Warranty

  • Five years on 570ZPR and 570ZPRX models
  • Two years on 570Z, 570ZLP and 570ZXF models

Dimensions

  • Body diameters:
    • 1⅜” on 2”, 3”, 4”, 6” and 6” Side Inlet
    • 1⅝” on 12”
    • 1¾” on 12” Side Inlet
  • Cap diameter: 2”
  • Inlet thread: ½” Female
  • Side inlet location: 4¾” (measured from the top of spray head to center of the side inlet port)

Additional Features

  • Corrosion-resistant stainless steel retraction spring
  • All models shipped with installed flush plug

Options Available

  • Serviceable Check Valve (570CV) prevents low-head drainage on elevation changes of up to 10 feet (not compatible with Side Inlet models)
  • Replacement Zero-Flush seal (570SEAL)
  • Effluent water indicators:
    • Effluent Shrub Adapter (102-1231)
    • Effluent snap-on cap cover (89-9752)
    • Effluent Cap with seal (102-1211)
  • 6” Riser Extender (570-6X)
  • 6” Stationary Riser (570-SR-6) [½” male-threaded inlet]
  • 18” Stationary Riser (570-SR-18) [½” male-threaded inlet]
  • Riser Pull-up Tool (89-6395)
  • Nozzle Adjustment Key (89-7350)

570Z Models:

  • 570Z-2P - 2” spray head
  • 570Z-3P - 3” spray head
  • 570Z-4P - 4” spray head
  • 570Z-4P COM - 4” spray head with Check Valve
  • 570Z-6P - 6” spray head
  • 570Z-6P SI - 6” spray head, Side Inlet Body
  • 570Z-6P COM - 6” spray head with Check Valve
  • 570Z-12P - 12” spray head
  • 570Z-12P SI - 12” spray head, Side Inlet Body
  • 570Z-12P COM - 12” spray head with Check Valve
  • 570S - Shrub adapter

4” Pop-Up Body (570Z)

  • Inlet: ½” I.P.S. Thread
  • Height: 4¾” (4”)
  • Pop-Up: 4”
  • Retraction: Positive Spring Retraction
  • Maximum Working Pressure: 75 PSI
  • Recommended Operating Range: 20 – 50 PSI
Toro 570Z Spray HeadToro 570Z Spray HeadToro 570Z Spray Head

Shipping Policy

Returns

Hours

You may also like

Recently viewed